PROKON-Access violation at address 00429BA4 in module 'wall.EXE'. Read of address DFE781F8

Not yet to be found...

If you happened to have the solution, please email me at administrator@esajp.com.

 

Windows XP-The system cannot log you on now because the domain is not available

View products that this article applies to.

Article ID	:	824302
Last Review	:	October 26, 2006
Revision	:	6.5

On This Page

SYMPTOMS

CAUSE

RESOLUTION

Hotfix information

Prerequisites

Restart requirement

Hotfix replacement information

File information

Windows XP, 32-bit edition

Windows XP, 64-bit edition

Windows 2000

STATUS

MORE INFORMATION

SYMPTOMS

If you log on with cached credentials (for example, you establish a Virtual Private Network (VPN) connection to your corporate network) and you try to connect to a network resource, you may receive the following error message and you are continuously prompted for your user name and password:

The system cannot log you on now because the domain DomainName is not available.

CAUSE

This problem may occur if your user credentials have either expired or have been removed.

Note You are not notified that your credentials are expired or have been removed.

RESOLUTION

Hotfix information

A supported hotfix is available from Microsoft. However, this hotfix is intended to correct only the problem that is described in this article. Apply this hotfix only to systems that are experiencing this specific problem. This hotfix might receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next software update that contains this hotfix.

If the hotfix is available for download, there is a "Hotfix download available" section at the top of this Knowledge Base article. If this section does not appear, contact Microsoft Customer Service and Support to obtain the hotfix. 

Note If additional issues occur or if any troubleshooting is required, you might have to create a separate service request. The usual support costs will apply to additional support questions and issues that do not qualify for this specific hotfix. For a complete list of Microsoft Customer Service and Support telephone numbers or to create a separate service request, visit the following Microsoft Web site:

http://support.microsoft.com/contactus/?ws=support (http://support.microsoft.com/contactus/?ws=support)

Note The "Hotfix download available" form displays the languages for which the hotfix is available. If you do not see your language, it is because a hotfix is not available for that language.

Prerequisites

No prerequisites are required.

Restart requirement

You must restart your computer after you apply this hotfix.

Hotfix replacement information

This hotfix does not replace any other hotfixes.

File information

The English version of this hotfix has the file attributes (or later file attributes) that are listed in the following table. The dates and times for these files are listed in coordinated universal time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time tool in Control Panel. 

Windows XP, 32-bit edition

 Date Time Version Size File name  --------------------------------------------------------------   19-Aug-2003 01:35 5.1.2600.117 100,352 Msv1_0.dll (pre SP1)   26-Aug-2003 02:28 5.1.2600.1261 110,592 Msv1_0.dll (post SP1) 

Windows XP, 64-bit edition

 Date Time Version Size File name Platform  ------------------------------------------------------------------------------  19-Aug-2003 01:35 5.1.2600.117 340,480 Msv1_0.dll IA-64 (before SP1)  18-Aug-2003 22:39 5.1.2600.117 100,352 Wmsv1_0.dll x86 (before SP1)  26-Aug-2003 02:04 5.1.2600.1261 345,600 Msv1_0.dll IA-64 (after SP1)  26-Aug-2003 02:28 5.1.2600.1261 110,592 Wmsv1_0.dll x86 (after SP1)

Windows 2000

 Date Time Version Size File name  ----------------------------------------------------------  15-Jul-2003 20:23 5.0.2195.6748 124,688 Adsldp.dll   15-Jul-2003 20:23 5.0.2195.6748 132,368 Adsldpc.dll   15-Jul-2003 20:23 5.0.2195.6748 63,760 Adsmsext.dll   15-Jul-2003 20:23 5.0.2195.6761 381,712 Advapi32.dll   15-Jul-2003 20:23 5.0.2195.6753 69,392 Browser.dll   15-Jul-2003 20:23 5.0.2195.6680 134,928 Dnsapi.dll   15-Jul-2003 20:23 5.0.2195.6780 96,528 Dnsrslvr.dll   15-Jul-2003 20:23 5.0.2195.6753 47,376 Eventlog.dll   15-Jul-2003 20:23 5.0.2195.6759 148,240 Kdcsvc.dll   18-Jun-2003 15:43 5.0.2195.6758 205,072 Kerberos.dll   14-Jul-2003 02:17 5.0.2195.6779 509,712 Lsasrv.dll   15-Jul-2003 17:39 5.0.2195.6782 109,840 Msv1_0.dll   15-Jul-2003 20:23 5.0.2195.6601 311,568 Netapi32.dll   15-Jul-2003 20:23 5.0.2195.6695 371,984 Netlogon.dll   15-Jul-2003 20:23 5.0.2195.6781 931,088 Ntdsa.dll   15-Jul-2003 20:23 5.0.2195.6742 392,464 Samsrv.dll   15-Jul-2003 20:23 5.0.2195.6737 131,344 Scecli.dll   15-Jul-2003 20:23 5.0.2195.6737 306,448 Scesrv.dll   15-Jul-2003 20:08 5.0.2195.6776 4,858,368 Sp3res.dll   15-Jul-2003 20:23 5.0.2195.6601 51,472 W32time.dll   15-Jul-2003 20:23 5.0.2195.6741 126,224 Wldap32.dll   14-Jul-2003 02:17 5.0.2195.6779 33,552 Lsass.exe   16-Aug-2002 11:32 5.0.2195.6601 57,104 W32tm.exe   26-Mar-2003 19:37 5.0.2195.6695 71,888 Ksecdd.sys 

STATUS

Microsoft has confirmed that this is a bug in the Microsoft products that are listed in the "Applies to" section.

MORE INFORMATION

For additional information about how hotfix packages are named , click the following article number to view the article in the Microsoft Knowledge Base:

816915 (http://support.microsoft.com/kb/816915/) New naming schema for Microsoft Windows software update packages

---

APPLIES TO

•	Microsoft Windows XP Home Edition
•	Microsoft Windows XP Professional
•	Microsoft Windows 2000 Advanced Server
•	Microsoft Windows 2000 Professional Edition
•	Microsoft Windows 2000 Server

Keywords:

kbautohotfix kbhotfixserver kbbug kbfix kbqfe kbwin2000presp5fix KB824302

Internet Explorer 7 & 8 -

Just follow the steps.

Inoue

Microsoft Internet Explorer crash

Contributed by Administrator

Saturday, 21 October 2006

You may see this behavior on some sites and only sometimes.

Parasite IEHelp.dll a add-on are active in your Microsoft Internet Explorer and this plug-in ( add-on ) may result in

Internet Explorer illegal operation with a garbadge and bad error description.

Go in Tools

Manage Add-ons..

Find the

Parasite Quick find Bho aka QuickFind BHO IEHelp.dll

The buggy plug-in are related to TEXTware

IE shuts down without warning.

Disable the plug-in

Delete any registry settings with IEHelp.dll

Uninstall Bogskab or

Delete %Program files%\TEXTware\

on your PC

http://www.inoue.dk Powered by Joomla! Generated: 13 October, 2008, 08:10

AUTOCAD 2000- Error: Security system ... is not functioning or improperly installed

Published date: 2008-Nov-05  ID: TS36162 Applies to: AutoCAD® 2000i AutoCAD® 2000

Issue

The following error message is displayed if AutoCAD is unable to find the hardware lock installed on the parallel port:

FATAL ERROR: Security system (hardware lock or network license) is not functioning or is improperly installed.

Solution

This error can occur for several reasons:

Dynamic devices

A dynamic device (for example, a printer with enhanced drivers or a scanner) is connected after the hardware lock, on the parallel port.

If this is the problem, remove any devices that are connected to the parallel port and the hardware lock. If this action resolves the problem, you need to consider installing a second parallel port.

Other hardware locks

Another hardware lock is connected between the parallel port and the AutoCAD hardware lock.

If this is the problem, connect the hardware lock directly to the parallel port (in the first position). If this resolves the problem, but causes difficulties for the other hardware lock, then you need to consider installing a second parallel port.

Sentinel driver

The Sentinel driver is not installed, or not working properly.

Note: Refer to the AutoCAD Installation Guide, which contains information about upgrading, configuring, and uninstalling the Sentinel driver.

If you are working with an Intel Pentium II 350 MHz or faster system, Autodesk Product Support recommends that you download the latest Sentinel driver from the SafeNet website at www.safenet-inc.com/support/tech/sentinel.asp. or http://www.keil.com/download/docs/290.asp

Use the following procedures to (a) verify that the currently installed Sentinel driver is working correctly, and (b) determine the version number of the driver.

For Windows® NT®

1. From the Start menu (Windows), choose Settings > Control Panel.
2. In the Control Panel, double-click Multimedia.
3. In the Multimedia Properties dialog box, select the Devices tab.
4. In the Multimedia Devices list, expand Other Multimedia Devices.
5. Select Sentinel for i386 Systems and choose Properties.
6. In the Sentinel for i386 Systems Properties dialog box, choose Settings.
7. In the Sentinel Driver dialog box, you can view or modify the current settings for the driver. Choose About.
8. In the Sentinel System Versions dialog box, you can view version information for the currently installed Sentinel System software (the driver and its ancillary programs).

For Windows 98 or Windows 95

1. Run the file sentw95.exe to open the Sentinel Driver Setup Program window. The file is located in one of the following directories.

• C:\windows\system\rnbosent\
• C:\Program Files\ACAD2000\DRV\w95lock\

2. From the Functions menu, choose Configure Sentinel Driver. If the driver is not working correctly, a warning message is displayed. In this case, you need to remove the Sentinel driver, and then reinstall it.
3. Choose About to view version information for the driver.

Parallel port settings

Parallel port settings are incorrect.

If this is the problem, modify the BIOS settings for the parallel port. For example, the following settings are available on most systems.

• Normal
• Compatible
• Bi-directional
• IBM-AT

Note that EPP, ECP, and ECP+ might not be the most suitable settings.

Note: Certain devices, such as printers, require specific settings for the parallel port. For example, some of the latest printer drivers require bi-directional mode.

Defective hardware lock

The hardware lock might be damaged or faulty.

If this is the problem, use another AutoCAD  hardware lock. If this resolves the problem, the original hardware lock is probably damaged or faulty. Please refer to your dealer/distributor to obtain a replacement hardware lock.

See also

• AutoCAD® 2000 workstation does not receive a license but an AutoCAD Release 14 workstation does

McAfee Security Center 2008-When there's a yellow exclamation mark at your task bar and when you double-click on the yellow exclamation box, they ask

McAfee applications are not able to update through authenticating Proxy servers causing Signature files to be out of date

Summary: Some Internet proxy servers require you to enter a username and password to authenticate. McAfee products are not able to simulate this process, causing updates to fail and signature files to be out of date.

Affected Suites:	Affected Products:	Affected Operating Systems:
Total Protection Internet Security Suite PC Protection Plus VirusScan Plus	AntiSpyware  Data Backup Personal Firewall Privacy Service  QuickClean  SecurityCenter  SiteAdvisor Anti-Spam SpamKiller  VirusScan  Wireless Protection	Windows 2000 Windows XP Windows Vista

Description

Some Proxy servers are configured to require authentication with a username and password before allowing any network traffic through. While this is a valid configuration, the authentication requirement causes McAfee product downloads and updates to fail.

Solution

When connecting to the Internet through a proxy, McAfee Updates displays No Update are available. After 8 days, the McAfee protection status icon will be displayed in the system tray. Double-clicking the icon will open McAfee SecurityCenter which will report the problem: Your signature files are 8-29 days old. If the updates continue to fail, after 30 days the problem description will change to Your signature files are more than 30 days old.

Option 1 - Run the MSCPRXFIX.EXE tool

Note: This tool cannot be used if a proxy server is authenticating the user. In that case, go to http://us.mcafee.com and reinstall VirusScan to get the latest signature files.

1. Download the tool from: http://download.mcafee.com/products/licensed/cust_support_patches/MSCPRXFIX.exe.
2. Double-click MSCPRXFIX.exe.
3. After running the tool, restart the computer.
4. To check for updates, right-click the M icon in the system tray and select Updates.
   

Option 2 - Disable authentication on the proxy server to allow anonymous connections

Consult your proxy server manuals and support information for assistance with allowing anonymous connections.

Additional information

McAfee is not able to provide assistance with the following configurations, and provides them as suggestions only:

• Use rule-based authentication and create a rule to allow anonymous connections for the following domain names: *.mcafee.com, *.siteadvisor.com, *.hackerwatch.com.
• Set up the default gateway to a network border device other than the proxy server. Then open Internet Explorer, click Tools, Internet Options and add the following domain names to the Local Intranet list on the Security tab: *.mcafee.com, *.siteadvisor.com, *.hackerwatch.com.

McAfee is unable to assist in the creation of authentication rules for third party proxy servers. Please consult your proxy server manuals and support information.

Last Modified: 12/07/07
Modified by: WHudson

McAfee Security Center 2008-To uninstall & reinstall McAfee Security Center 2008

How to uninstall or reinstall supported McAfee consumer products using the McAfee Consumer Products Removal tool (MCPR.exe)

Summary: This document explains how to remove and reinstall McAfee Consumer products using the McAfee Consumer Products Removal tool. This option should only be used after you remove your McAfee product through Add/Remove Programs.

Affected Suites:	Affected Products:	Affected Operating Systems:
Total Protection Internet Security Suite PC Protection Plus VirusScan Plus Wireless Protection	AntiSpyware  Data Backup Personal Firewall  Privacy Service  QuickClean  SecurityCenter  SiteAdvisor Anti-Spam SpamKiller  VirusScan  Wireless Protection	Windows 2000 Windows XP Windows Vista

Note: This tool (previously named MCPR2.EXE) is not compatible with Microsoft Windows 98 or ME.

Description

Running the McAfee Consumer Product Removal tool (MCPR.exe) removes all 2005, 2006, 2007, and 2008 versions of McAfee consumer products.

Solution

IMPORTANT: If your McAfee products were preinstalled by the manufacturer of your computer, please make sure to activate your McAfee subscription before uninstalling. Reinstalling from a CD or download will only install your McAfee consumer applications, but may not recover your paid subscription term information.

 

 

---

 

Step 1 - Uninstall your McAfee consumer products using Add/Remove Programs in the Windows Control Panel

Windows 2000/XP

1. Click Start, Settings, Control Panel.
2. Double-click Add or Remove Programs.
3. Select the McAfee SecurityCenter product.
4. Click Remove and follow the steps provided.

Windows Vista

1. Click Start, Search, type Programs and Features, and click Go.
2. Double-click Programs and Features.
3. Select the McAfee SecurityCenter product.
4. Click Uninstall and follow the steps provided.

Step 2 - Download and run MCPR.exe

1. Download the removal tool from: 
   
   http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe
   
    
2. Click Save and save the file to a folder on your computer.
3. Navigate to the folder where the file was saved.
4. Make sure all McAfee windows are closed.
5. Double-click MCPR.exe to run the removal tool. 
   
   Note: Windows Vista users must right-click MCPR.exe and select Run as Administrator. 
   
   
6. Restart your computer after receiving the message CleanUp Successful. 
   
   Your McAfee product will not be fully removed until the system is restarted.

If the message Cleanup Unsuccessful is displayed, follow the steps below to view and save your MCPR log files for analysis by Technical Support.

Saving troubleshooting logs

1. On the Cleanup Unsuccessful notification dialog, click View Logs.
2. Your troubleshooting logs will open in a Notepad window. Click File, Save As, and save the file to your Desktop. Name the file MCPR_date.txt (for example: MCPR_Jan10_08.txt).
3. Contact McAfee Technical Support and provide the log file to your technician for troubleshooting.

When all McAfee products are removed from your computer, continue to Step 3.

Step 3 - Reinstall your McAfee Products

Note: Please refer to the instructions from the partner you purchased your McAfee consumer product from, or reinstall using the partner links below.

• If you purchased your software directly from McAfee, go to https://us.mcafee.com/root/login.asp?ErrCode=PLEASE_LOGIN to log in and download your software. 
   
• Comcast users should go to http://security.comcast.net/ 
   
• DELL users should go to https://us.mcafee.com/root/login.asp?affid=105 
   
• Gateway users should go to https://us.mcafee.com/root/login.asp?affid=370
   
• eMachines users should go to https://us.mcafee.com/root/login.asp?affid=365 
   
• MSN users should go to https://us.mcafee.com/root/login.asp?affid=420 
  
  
• AOL users should search on keyword: Safety (http://daol.aol.com/safetycenter). On the AOL Safety & Security page, click Download Now.

Last Modified: 2/06/08
Modified by: slp